[FW1] NAT Problem

[Justin Owens <justin.owens@commtech.ie>]

    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]


Hi

I would appreciate it if someone could be of help with a problem we are
having.
We have FW-1 v4.0 running on NT. We have two machines in the DMZ - 10.1.1.1
& 10.1.1.2.
We need to have one public address translating to both of these depending on
the service.
Example: A person telnets to our public address he is pointed toward
10.1.1.1 - The same person ftp's to the same public address he goes to
10.1.1.2
My problem implementing this is that because of the static route for the NAT
translation on the firewall it always goes to one or the other address.
Basically I need to be able to route based on the service.
We can't just allocate two public addresses one for each because of
historical reasons.
Hope someone can be of help - Thanks in advance.

Justin Owens




**********************************************************************
Justin Owens

Commtech Solutions Ltd
The Maltings
Marrowbone Lane
Dublin 8
Ireland

tel:   +353 1 260 8450
fax:  +353 1 633 5935

email: justin.owens@commtech.ie
web: www.commtech.ie

**********************************************************************



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================