Re: [FW1] HP-UX 10.20 and FW-1 4.0 SP1 PANICS!

["Aylton Souza" <ayltonsz@websecret.com.br>]

Hello,

There are a few problems with Firewall-1 running under HP-UX with 2
processors.

I suggest that you apply SP4 that solves most of them but there's another
fix that you need to apply manually by fixing vmunix directly.

SP4 solves the panics for example when you're using SynDefender, but there
is another issue in which you may run into.

After applying it, the panics may not occur anymore depending on some
architeture particularities.


If the panics persist and they appear to take place every two hours(or
something alike) , please write again.

Best wishes,

Aylton

-----Mensagem original-----
De: Joerg Major <jmajor@iqproducts.de>
Para: CheckPoint Mailinglist <fw-1-mailinglist@lists.us.checkpoint.com>
Data: Sábado, 10 de Julho de 1999 16:48
Assunto: [FW1] HP-UX 10.20 and FW-1 4.0 SP1 PANICS!


>
>Hi FireWall-1 Experts,
>
>we have installed a HA Environment with the following components:
>Two HP-UX 10.20 D390 Servers, each with 2 CPUs and 3 double BTLan
>Interfaces.
>Running FW-1 4.0 SP1 modul and StoneBeat 2.1.3 for primary and secondary.
>We have a separate FW-1 4.0 SP2 Management Station HP 10.20 as Control
>Station for FW-1 modules and StoneBeat. The Management Station is running
>without any problems.
>The strange behavior we found is only focussed on both productive
>HP D390 gateways!
>The HP system crashes sometimes up to 5 times a day or during the night.
>The primary HP panics with the error "Data page fault..." followed
>by a reboot, the secondary takes over all the connections (quite O.K)
>but sometimes 2 minutes later it crashes also resulting in a complete loss
>of network traffic which is most critical!
>
>Does anybody have seen similar effects on HP hardware?
>
>Best Regards,
>
>Joerg Major
>email: jmajor@iqproducts.de
>
>
>
>
>
>===========================================================================
=====
>     To unsubscribe from this mailing list, please see the instructions at
>               http://www.checkpoint.com/services/mailing.html
>===========================================================================
=====
>



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================