[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [FW1] problems with securemote and xircom



    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set. Some ]
    [ characters may be displayed incorrectly. ]



> Micha,
> Try this to get SecuRemote working properly:
> If the notebooks need to access your internal network when they are
> remotely
> connected to the Internet the SecuRemote client should be installed on the
> Dial
> Up adapter only. When prompted during the SecuRemote installation to
> install on
> All Network adapters (or) on the Dial Up adapters only, select Dial Up
> adapters
> only. This way there is no binding FW1 to the ethernet adapter.
	[Micha Borrmann]  the installation program doesn't ask for binding
adapters.

> If this approach doesn't solve the problem, do this:
> Take a good look at Network Properties before you run the SecuRemote
> installation. When prompted to install on All Network adapters select OK.
> When
> the SecuRemote installation is complete you are prompted to reboot your
> laptop.
> Select NO and immediately go to the Network Properties. Manually remove
> the FW1
> bindings that you don't need. Now reboot.
	[Micha Borrmann]  I can't see FW1 bindings in the network properties
after I installed securemote

> SecuRemote chokes upon boot if it cannot perform all the bindings you see
> in
> Network Properties. Sometimes (especially with AOL) this second approach
> is the
> only way to get the bindings you really need.
> 
> Micha Borrmann wrote:
> 
> 
> Hello,
> 
> there are digital notebooks HiNote Ultra2000 running windows NT 
> workstation
> (german, SP4). These notebooks are including Xircom Ethernet 
> 10/100 + Modem
> 56k card. This is not an PCMCIA card, it is static in the notebook.
> 
> The notebook works fine. After I was install securemote (4.005) it is
> possible to get access through firewalls, but the Ethernet 
> dosn't work! The
> modem works without any errors, but it is not possible to use 
> the Ethernet.
> If I uninstall securemote, Ethernet and modem are working correctly.
> 
> if securemote is not installed on the notebook, ipconfig /all produce:
> 
> Windows NT IP-Konfiguration     
>       Host-Name . . . . . . . . . : larissa.interact.de
>         DNS-Server. . . . . . . . . : 192.168.0.1
>         Knotentyp . . . . . . . . . : Peer-Peer         
>         NetBIOS-Bereichs-ID . . . . :   
>         IP-Routing aktiviert. . . . : Nein      
>         WINS-Proxy aktiviert. . . . : Nein      
>         NetBIOS-Auswertung mit DNS  : Nein 
> 
> Ethernet-Adapter NdisWan4:      
>         Beschreibung. . . . . . . . : NdisWan Adapter   
>         Physische Adresse . . . . . : 00-00-00-00-00-00         
>         DHCP aktiviert. . . . . . . : Nein      
>         IP-Adresse. . . . . . . . . : 0.0.0.0   
>         Subnet Mask . . . . . . . . : 0.0.0.0   
>         Standard-Gateway. . . . . . :  
> 
> Ethernet-Adapter CEM561:        
>         Beschreibung. . . . . . . . : Xircom Ethernet 10/100 + Modem 56
> Physische Adresse . . . . . : 00-80-C7-3E-62-E2         
>         DHCP aktiviert. . . . . . . : Ja        
>         IP-Adresse. . . . . . . . . : 192.168.0.185     
>         Subnet Mask . . . . . . . . : 255.255.255.0     
>         Standard-Gateway. . . . . . : 192.168.0.1       
>         DHCP-Server . . . . . . . . : 192.168.0.1       
>         Primärer WINS-Server. . . . : 192.168.0.1       
>         Sekundärer WINS-Server. . . : 192.168.0.2       
>         Lease erhalten. . . . . . . : Dienstag, 31. August 1999 10:22:07
> 
>         Lease läuft ab. . . . . . . : Dienstag, 31. August 1999 
> 15:22:07 
> 
> if securemote is installed, the part in ipconfig /all with the Ethernat
> Adapter failed. The system starts with the error: one service couldn't
> startet, have a look in the event viewer. In the eventviewer, 
> there is an
> error message.
> 
> source: FW1, event: 1
> description: FW1: FwOpenAdapter: Adapter Not Found
> 
> also there is an information message in the eventviewer
> 
> source: FW1, event: 2
> description: FW1: Attached to \Device\NdisWan4
> 
> What can I do to use securemote and the Ethernet with these notebook?
> 
> 
> Micha Borrmann
> Systemadministrator, CCSE
> 
> INTERACTIVE Online Services I.O.S. GmbH                 
> Kedenburgstrasse 44 - 22041 Hamburg - Germany
> 
> Hamburg-Muenchen-Wiesbaden
> E-Mail: mailto:mb@interact.de             RIPE-Handle    : MB1  
> URL   : http://www.interact.de/   INTERNIC-Handle: MB16858
> phone : +49.40.65699045
>   fax : +49.40.65699040
> Reinventing Today's Communication
> 
> ________________________________________________________________
> Paul Abeln                  Plantronics, Inc.
> Senior Network Engineer             345 Encinal Street
> paul.abeln@plantronics.com          Santa Cruz, CA 95061-0635
> 
> 
> 


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================